ENGINE WELDER · PIPELINE WELDING

Pipeline Welding Solutions for Long-Distance Pipelines

Engine-driven welders and automatic pipeline welding systems for oil & gas, city gas, chemical and water pipelines

Pipeline welding is the most demanding stage of any long-distance pipeline project. DENVO supplies a complete equipment chain from root pass to cap pass — diesel engine-driven welders, dual-torch dual-arc machines and fully automatic pipeline welding systems. Proven on the West-East Gas Pipeline, the China-Russia East Line and major Middle East projects.

10A–1200AWelding Current
DN100–1420Pipe Diameter
3–5×Automatic Welding Speed

Why DENVO for Pipeline Projects

Built for the harshest pipeline construction environments — extreme cold, high altitude, desert heat and long duty cycles.

⚡

Dual-Torch Dual-Arc Welding

The DS series runs two torches on opposite sides of the joint simultaneously, doubling deposition rate and cutting arc-on time on long-diameter fills.

❄

Patented Induction Generator

Independently developed induction generator technology delivers stable output with high efficiency and a high continuous load factor.

🚗

All-Terrain Readiness

Verified start-up at -40°C, 4,500 m altitude with less than 8% power derating, and continuous operation at +55°C.

⚡

Built-In Auxiliary Power

10–30 kVA output runs lighting, grinders and instrumentation alongside the welding power from a single machine.

Pipeline Welding Applications

From national-scale trunk lines to urban district heating networks.

🔴

Long-Distance Trunk Pipelines

Diameters from φ219 to φ1420 mm with wall thickness 6–34 mm demand tight mechanical properties and full penetration.

  • Root pass with stable penetration and even root bead reinforcement
  • High deposition rate fill passes with dual-torch efficiency
  • Full automatic welding for φ813 mm and above at 3–5× manual speed
🏭

City Gas Distribution Networks

Urban trench work is tight, busy and time-limited — noise control and mobility decide the equipment.

  • DS silent series at ≤75 dB for night work in residential districts
  • Compact footprint for narrow trenches
  • Electric start ready for welding within 3 minutes of arrival
⚙

Chemical & Process Pipelines

Mixed materials from carbon steel to stainless and alloy steel require a wide current range and stable arc behaviour.

  • Stable low-current arc from 50 to 150 A for thin-wall stainless TIG and SMAW
  • Auxiliary power drives preheat and heat-treatment equipment
  • One dual-torch machine covers two work stations during annual turnarounds
💧

Water Supply & District Heating

Large-diameter transmission steel and pre-insulated heating pipes need heavy current plus fast mobilisation.

  • HW600DS and HW800DS cover thick-wall transmission steel
  • Synchronised operation with heat-shrink sleeve equipment
  • Fast deployment to minimise water and heat shutdown time

Recommended Equipment Configuration

Pipeline Type Diameter Range Recommended Model Welding Method
Small-diameter trunk line φ219–φ406 mm HW450D / HW450DS Manual / semi-automatic
Medium-diameter trunk line φ406–φ813 mm HW600DS / HW800DS Semi-automatic / fully automatic
Large-diameter trunk line φ813–φ1420 mm HW1000 / HW1200 + automatic welder Fully automatic
City gas network φ89–φ630 mm HW320DS / HW450DS Manual (silent series)
Chemical process piping Mixed specifications HW450D / HW600DS Manual / TIG
Water and heating mains φ219–φ1020 mm HW450D / HW800DS Manual / semi-automatic

Environmental Adaptability

Condition Verified Performance
Extreme cold Normal start-up and operation at -50°C, validated on the China-Russia East Line cold section
High altitude Less than 8% power derating at 4,500 m, measured on the Golmud–Lhasa section
Desert heat Continuous operation at +55°C ambient, long-term service on Middle East projects

Project Experience

  • West-East Gas Pipeline Lines 1, 2 and 3
  • China-Russia East Line natural gas pipeline
  • Central Asia natural gas pipeline (CAGP)
  • China-Myanmar oil and gas pipeline
  • Multiple Middle East pipeline projects in Iraq, Oman and Saudi Arabia
  • Russian Far East pipeline projects

Get a Pipeline Equipment Proposal

Tell us your pipe diameter, steel grade and welding procedure — our engineers will specify the machine and welding process for your project.